Miranda ISO 3 (123) Right Hand Cranked Finishing Tools
Price Range: ₹572 to ₹6,265
Type of Product: Cranked Finishing Tools
Length (mm): 90 - 280
Shank Size H x B (mm): 1010 x 6040
Grade: ISO 3 (123)
Hand Type: Right Hand
Models in the Miranda ISO 3 (123) Right Hand Cranked Finishing Tools range
| SKU | Model No. | Length (mm) | Price | Add to cart |
|---|---|---|---|---|
| CU.TU.CR.00315 | 123-2516 | 140 mm | Was ₹2,060₹1,236 inclusive of GST Save 40% | |
| CU.TU.CR.00033 | 123-1212 | 100 mm | Was ₹1,050₹630 inclusive of GST Save 40% | |
| CU.TU.CR.00040 | 123-1610 | 110 mm | Was ₹1,130₹678 inclusive of GST Save 40% | |
| CU.TU.CR.00041 | 123-2012 | 125 mm | Was ₹1,530₹918 inclusive of GST Save 40% | |
| CU.TU.CR.00032 | 123-1010 | 90 mm | Was ₹954₹572 inclusive of GST Save 40% | |
| CU.TU.CR.00034 | 123-1616 | 110 mm | Was ₹1,450₹870 inclusive of GST Save 40% | |
| CU.TU.CR.00035 | 123-2020 | 125 mm | Was ₹2,010₹1,206 inclusive of GST Save 40% | |
| CU.TU.CR.00036 | 123-2525 | 140 mm | Was ₹3,020₹1,812 inclusive of GST Save 40% | |
| CU.TU.CR.00037 | 123-3232 | 170 mm | Was ₹5,200₹3,120 inclusive of GST Save 40% | |
| CU.TU.CR.00038 | 123-4040 | 200 mm | Was ₹5,850₹3,510 inclusive of GST Save 40% | |
| CU.TU.CR.00039 | 123-5050 | 240 mm | Was ₹10,100₹6,060 inclusive of GST Save 40% | |
| CU.TU.CR.00043 | 123-3220 | 170 mm | Was ₹3,260₹1,956 inclusive of GST Save 40% | |
| CU.TU.CR.00044 | 123-4025 | 200 mm | Was ₹2,882₹1,729 inclusive of GST Save 40% | |
| CU.TU.CR.00042 | 123-2516 | 140 mm | Was ₹2,060₹1,236 inclusive of GST Save 40% | |
| CU.TU.CR.00045 | 123-5032 | 240 mm | Was ₹5,751₹3,451 inclusive of GST Save 40% | |
| CU.TU.CR.00046 | 123-6040 | 280 mm | Was ₹10,441₹6,265 inclusive of GST Save 40% |
Miranda ISO 3 (123) Right Hand Cranked Finishing Tools
Carbide tipped tools retain their cutting edge hardness at high machining temperatures & high cutting speeds that reduce machining cycle time. Carbide tipped tools improve surface finish & no wear and tear problem that improve tool life.Carbide tipped tools should always be used when machining highly abrasive/Hard materials.