Ergonomically shaped wood handle with protective caps on the clamping surfaces. Stable profiled rail with serration. Pressure plates can be replaced by hand – no tools required. Bessey anti-slip system 

Features:

• Integrated BESSEY anti-slip system: Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away.
• Reinforced malleable iron clamps: Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces.
• High-quality profiled rail: The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping.
• Pressure plate: For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.

Areas of Application

• Furniture and joinery works
• Carpentry and woodwork
• Kitchen construction and shop fitting
• Shell construction
• Interior fittings
• DIY
• Powerful and rigid clamping

Safety Information

• Use the product only in its original condition.
• Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
• Wear safety glasses to protect your eyes.
• Wear work or assembly gloves to protect your hands.
• Wear safety footwear to protect your feet.
• Thew handle must always be free of oil and grease to prevent slipping.
• Keep the product out of reach of children.
• Small parts must not be swallowed or inserted into body openings.
• Check the product for damage before each use and make sure that all moving parts are working properly.
• A damaged product must not be used.
• Follow the care instructions for each product – see www.bessey.de.
• Use only original BESSEY spare parts
• The clamping tool must not be used for lifting, pulling or leaning.
• The clamping tool must not be used to secure cargo during transportation.
• The clamping tool may only be tightened by hand without any additional aids.
• The clamping tool must not be used for permanent installation.
• Regularly check that the end stop is working properly when using clamps.

Material / Surface

• Upper and lower section made of reinforced malleable cast iron, powder-coated
• Hollow profile rail made of steel, cold-drawn, galvanised
• Spindle with trapezoidal thread in rolled steel, burnished
• Handle made of wood, water-based paint
• Pressure plate made of steel, cold pressed, galvanised
• Protective caps made of plastic

Care Instructions

• Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
• Clean the rails with solvent.
• Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
• Clean the fluting on the rails with a steel brush.
• Clean and oil the spindle regularly.
• If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only).
• Clean and oil the pressure plate regularly.

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.