• Quickly and infinitely adjustable for wall distances of 5 to 20 mm
• Spacer for floating laminate and parquet flooring installations
• Wide contact and support area for avoiding pressure points on the floorboards and plaster
• Easy to remove by simply turning back
• Very light and compact
• Clean the rails with solvent.

Features:

• Clever dial: Set up is fast and simple. Inserted between the wall and the first row of flooring, the distance to the wall can be set simply by turning the red dial. When the installation work is finished, the spacer is easy to remove
• Wide contact and support surface: Simply put, the pressure points on the wall and the flooring are avoided. There is no danger of the aid slipping or tilting –as can happen with wedges or blocks – when workingwith the new BESSEY spacer.
• Exact millimetre scale: Wall surface irregularities of 5 to 20 mm can be compensated for easily. The exact distance required for spacing can be readily seen on the millimetre scale.
• “Robust” in the size of a business card: Manufactured from impact and break resistant, glass fibre- reinforced polyamide, the spacer is light and tough and should last for years. It is just about the size of a business card.

Areas of application:

• Interior fittings
• Parquet & Laminate work
• DIY

Safety Information:

• Use the product only in its original condition.
• Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
• Wear safety glasses to protect your eyes.
• Wear work or assembly gloves to protect your hands.
• Wear safety footwear to protect your feet.
• Thew handle must always be free of oil and grease to prevent slipping.
• Keep the product out of reach of children.
• Small parts must not be swallowed or inserted into body openings.
• Check the product for damage before each use and make sure that all moving parts are working properly.
• A damaged product must not be used.
• Follow the care instructions for each product – see www.bessey.de.
• Use only original BESSEY spare parts
• The clamping tool must not be used for lifting, pulling or leaning.
• The clamping tool must not be used to secure cargo during transportation.
• The clamping tool may only be tightened by hand without any additional aids.
• The clamping tool must not be used for permanent installation.
• Regularly check that the end stop is working properly when using clamps.

Material / Surface

• Upper and lower section made of reinforced PA6 plastic

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.