• Edges with micro-serrations for prevent slipping
• D16/D16L: For short, straight and curved cuts
• D16S: No offset to blades, for short, straight and curved cuts with a large radius in both left and right directions

Safety Information

• Use the product only in its original condition.
• Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
• Wear safety glasses to protect your eyes.
• Wear work or assembly gloves to protect your hands.
• Wear safety footwear to protect your feet.
• Thew handle must always be free of oil and grease to prevent slipping.
• Keep the product out of reach of children.
• Small parts must not be swallowed or inserted into body openings.
• Check the product for damage before each use and make sure that all moving parts are working properly.
• A damaged product must not be used.
• Follow the care instructions for each product – see www.bessey.de.
• Use only original BESSEY spare parts
• Sheet metal snips must only be used to cut thin sheets of non-hardened steel.
• The cutting tool may only be used by hand without any additional aids.
• The cutting tool must be ground regularly and professionally. Dull cutting tools increase the risk of injury.

Care instructions

• Clean the rails with solvent.
• Rub the cutting edge with a lightly oiled cloth (remove material dust) in regular cycles, depending on the degree of soiling.
• Regularly oil the screw connections on the inside of the blade.
• Rusty or scratched cutting edge, gently scrape it off with an oil stone.
• If the snips exhibit too much play, adjust the screw iIt must still be possible to open and close the shears easily).

Package Content:

• 3 x Aviation Snips (D16, D16L, D16S)
• 1x Snips Pouch

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.