• Lever is in vertical clamping position
• Automatic, seamless adjustment of the clamping height up to 35 mm with almost constant clamping force – without manual changing of the pressing screw position
• Adjustable clamping force up to 1100N, based on the adjusting screw in the joint
• Sturdy, tempered sheet steel for longer service life
• Base plate hole pattern suitable for millimetres and inches
• High-quality, oil-resistant two-component plastic handle

Ready to go – the first time and for quick set-up during workpiece changes

BESSEY STC toggle clamps adapt to workpieces of varying thickness – without manual setting of the spindle and, with practically the same clamping force:

• Due to an automatic clamping width range

Uncompromisingly versatile

One size of the BESSEY toggle clamp replaces multiple competitor sizes simultaneously:

• Due to an extremely large clamping range, thanks to the patented mechanism

Powerful and gentle

Even sensitive workpieces, e.g. with veneered or varnished surfaces, can be gently clamped:

• Due to moving pressure plate with removable protective cap
• Due to clamping force regulation via adjustment screw in the joint

Areas of application:

• Furniture and joinery works
• Interior fittings
• DIY
• Secure quickly with self-adjusting clamping width

Safety information:

• Use the product only in its original condition.
• Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
• Wear safety glasses to protect your eyes.
• Wear work or assembly gloves to protect your hands.
• Wear safety footwear to protect your feet.
• Thew handle must always be free of oil and grease to prevent slipping.
• Keep the product out of reach of children.
• Small parts must not be swallowed or inserted into body openings.
• Check the product for damage before each use and make sure that all moving parts are working properly.
• A damaged product must not be used.
• Follow the care instructions for each product – see www.bessey.de.
• Use only original BESSEY spare parts
• The clamping tool must not be used for lifting, pulling or leaning.
• The clamping tool must not be used to secure cargo during transportation.
• The clamping tool may only be tightened by hand without any additional aids.
• The clamping tool must not be used for permanent installation.
• Regularly check that the end stop is working properly when using clamps.

Material / Surface:

• Sheet metal parts made of tempered steel, nickel-plated
• Spindle made of steel, galvanised
• Handle made of 2-component plastic
• Protective caps made of plastic

Care instructions:

• Clean the rails with solvent.
• Clean and oil the spindle regularly.

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.