• Innovative 360° rotating mechanism allows the handle unit to be placed around the rail – already before but also after fastening the clamp
• 12-step latching mechanism to securely hold the selected handle position
• Large clamping surfaces with removable protective caps
• Can be repositioned for spreading – without tools for and EZ360 thanks to simple release mechanism with push-button on the upper part
• One-handed operation with little effort required

All-round flexible use

The EZ360 one-handed clamp is extremely versatile:

• thanks to innovative 360° turning mechanism to perfectly adjust the handle position to the clamping task
• thanks to long protective caps to protect the workpiece surface and distribute the clamping force of up to 1,400 N
• by changing the upper part from clamping to spreading

Extremely convenient handling

On the one hand, the handle can be positioned in such a way that an optimal pumping position and thus better application of force is achieved. On the other hand, the handle can also be swivelled out of the working area after the clamping process, thus enabling several clamps to be placed in a very confined space:

• Due to the extra-long high-quality 2-component plastic handle with pump lever, which can be turned completely around the rail and securely locked in 12 positions
• Due to the release lever on the sliding arm for quick adjustment of the opening and release of the clamp

Robustness in a unique look

Where dynamic design meets durability:

• due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the rails
• due to the plastic housing, the grip mechanism is protected from dust and chips

Areas of application:

• Furniture and joinery works
• Kitchen construction and shop fitting
• Staircase construction
• Interior fittings
• Dry construction
• DIY
• One-handed clamping and spreading
• Assembly

Safety information:

• Use the product only in its original condition.
• Use the product only for its intended purpose. Improper use can cause personal injury or property damage.
• Wear safety glasses to protect your eyes.
• Wear work or assembly gloves to protect your hands.
• Wear safety footwear to protect your feet.
• Thew handle must always be free of oil and grease to prevent slipping.
• Keep the product out of reach of children.
• Small parts must not be swallowed or inserted into body openings.
• Check the product for damage before each use and make sure that all moving parts are working properly.
• A damaged product must not be used.
• Follow the care instructions for each product – see www.bessey.de.
• Use only original BESSEY spare parts
• The clamping tool must not be used for lifting, pulling or leaning.
• The clamping tool must not be used to secure cargo during transportation.
• The clamping tool may only be tightened by hand without any additional aids.
• The clamping tool must not be used for permanent installation.
• Regularly check that the end stop is working properly when using clamps.

Material / Surface

• Upper and lower section made of reinforced PA6 plastic
• Rail made of hardened steel, burnished
• Lever made of reinforced PA6 plastic
• Protective caps made of plastic

Care instructions:

• Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
• Clean the rails with solvent.
• Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
• Clean the fluting on the rails with a steel brush.

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.