This is an accurate testing instrument. It can output the function wave-form such as sine wave, square wave, rectangle wave, sawtooth wave and triangle wave. And the frequency and amplitude can be adjusted continuously. It is ideal equipment for engineer, electric lab and teaching.

• Frequency of the mode: 0.1Hz—2MHz
• Output waveform: Sine, Triangle, Square, ±Ramp, ±Pulse
• TTL/CMOS and OUTPUT synchronous output
• Voltage Control Frequency (VCF) Capacity
• Less than 1% distortion at 10Hz– 100 KHz
• Less than 0.5dB frequency response at 0.1Hz— 100 KHz
• Frequency Counter: 1Hz—30MHz
• Amplitude: Not less than 20V p–p (open circuit)
• DC Voltage: 0–±10V continuously adjustable
• Output signal impedance: 50 Ohms
• Function output symmetry adjust scope: 20%~80% (±10%)
• Output signal amplitude (peak-peak value): non-attenuate (2Vp-p-20Vp-p)±20% continuously adjustable, attenuate 20dB (0.2Vp-p-2.0Vp-p)±20% continuously adjustable, attenuate 40dB (20mVp- p-200mVp-p)±20% continuously adjustable
• The above are measured with load 1M2, the output signal amplitude will be half of standard at 50Ohms load. 

Output Signal Features:

• Sine wave distortion: <2%
• Triangle wave linear: >99% (10%-90% of output amplitude)
• Square wave rise edge times: less than 100nS (10%- 90% of output amplitude)
• Square wave fall edge times: less than 100nS (10%- 90% of output amplitude)
• Square wave rise and fall pulse less than or equal to 5%Vo (502 load).
• Test condition: frequency output: 10KHz, amplitude: 5Vp-, warm-up for 20 minutes.
• Output signal frequency stability: less than ±0.1%/min (test condition is the same as the above)
• Amplitude display (only for 502 load, at 1M2 load, the real output amplitude is double of the displaying value)

Features:

• It's convenient to operate and use with high intelligence for using the single microprocessor to control, running and displaying.
• Large scale single integrated accuracy function generator leads to super performance.
• Designed by large scale integrated circuit to insure the high reliability and high stability

Frequency Range: (Seven Ranges)

• 0.2Hz - 2Hz
• 2Hz - 20Hz
• 20Hz - 200Hz
• 200Hz - 2kHz
• 2kHz - 20kHz
• 20kHz - 200kHz
• 200kHz - 2MHz

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.