Yuzuki Shore D Digital Durometer / Rubber Hardness Tester, DRHTD
Roll over the image to zoom in
Key Features
- Product Type: Shore Durometer
- Range: 0 - 100 HD
- Resolution: 0.5 HD
ToolBuy Benefits
- Secure Payments
- Order Tracking (opens in a new tab)
₹4,069 (Incl. of all taxes)
₹3,448 + ₹621 GST (18%)
MRP was MRP ₹4,310
Save 20%
3 Business Days
1
–
Download Product LeafletNot available
Download Yuzuki CatalogueNot available
Download Yuzuki CatalogueNot available
Highlights
The principle used to measure hardness is based on measuring the resistance force of the penetration of a pin into the test material under a known spring load. The amount of penetration (max. 2.54 mm / 0.1 in.) is converted to hardness reading on a scale with 100 units
As per the ASTM D2240 Standard, readings below 10 and above 90 are not to be considered reliable and should be discarded. Therefore, it is important to select the approapriate Scale that will provide results between 10-90 units.
Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.
Specifications
| Range | 0 - 100 HD |
|---|---|
| Resolution | 0.5 HD |
| Accuracy | ±1% HD |
| Power Supply | 1.5V Cell (LR44) |
| Working Temperature | 0 - 40°C |
| Storage Temperature | -20 ~ 70°C |
| Relative Humidity | < 80% |
| Least Count | 1 HD |
| Indenter Range | 0 - 2.5mm |
| Indenter Tip Pressure | 0 - 44.5N |
| Indenter Tip Size | SR0.1mm |
| Scale | Shore D |
| Application | Hard Rubber & Plastic |
