Miranda 1.00 - 20 mm Solid Carbide End Mills (4 Flute Ball Nose, TiAIN Coated)
Price Range: ₹1,273 to ₹19,362
Type Of Product: Solid Carbide End Mills
Body Dia. (mm): 1.00 - 20 mm
Working Length (mm): 3 - 38 mm
Total Length (mm): 38 - 102 mm
Type: Scball Nose - EM 4 Flute - TiAIN Coated
Shank Dia. (mm): 3.00 - 20 mm
Models in the Miranda 1.00 - 20 mm Solid Carbide End Mills (4 Flute Ball Nose, TiAIN Coated) range
| SKU | Body Dia | Shank Dia | Working Length (mm) | Total Length (mm) | Price | Add to cart |
|---|---|---|---|---|---|---|
| CU.SO.CA.00018 | 1.00 mm | 3.00 mm | 3 mm | 38 mm | Was ₹3,030₹1,273 inclusive of GST Save 58% | |
| CU.SO.CA.00019 | 1.50 mm | 3.00 mm | 5 mm | 38 mm | Was ₹3,030₹1,273 inclusive of GST Save 58% | |
| CU.SO.CA.00020 | 2.00 mm | 3.00 mm | 7 mm | 38 mm | Was ₹3,030₹1,273 inclusive of GST Save 58% | |
| CU.SO.CA.00021 | 2.50 mm | 3.00 mm | 7 mm | 38 mm | Was ₹3,030₹1,273 inclusive of GST Save 58% | |
| CU.SO.CA.00022 | 3.00 mm | 3.00 mm | 9 mm | 38 mm | Was ₹3,030₹1,273 inclusive of GST Save 58% | |
| CU.SO.CA.00023 | 4.00 mm | 4.00 mm | 14 mm | 50 mm | Was ₹3,570₹1,499 inclusive of GST Save 58% | |
| CU.SO.CA.00024 | 5.00 mm | 5.00 mm | 16 mm | 50 mm | Was ₹4,490₹1,886 inclusive of GST Save 58% | |
| CU.SO.CA.00025 | 6.00 mm | 6.00 mm | 20 mm | 60 mm | Was ₹4,680₹1,966 inclusive of GST Save 58% | |
| CU.SO.CA.00026 | 8.00 mm | 8.00 mm | 20 mm | 60 mm | Was ₹5,300₹2,226 inclusive of GST Save 58% | |
| CU.SO.CA.00027 | 10 mm | 10 mm | 25 mm | 75 mm | Was ₹9,800₹4,116 inclusive of GST Save 58% | |
| CU.SO.CA.00028 | 12 mm | 12 mm | 25 mm | 75 mm | Was ₹11,400₹4,788 inclusive of GST Save 58% | |
| CU.SO.CA.00029 | 16 mm | 16 mm | 32 mm | 89 mm | Was ₹21,700₹9,114 inclusive of GST Save 58% | |
| CU.SO.CA.00030 | 20 mm | 20 mm | 38 mm | 102 mm | Was ₹46,100₹19,362 inclusive of GST Save 58% |
Miranda 1.00 - 20 mm Solid Carbide End Mills (4 Flute Ball Nose, TiAIN Coated)
Endmils are integral shank cutters capable of cutting on the periphery and end . These cutters are used for profile milling, facing narrow surfaces and producing open slots and pockets where a 'plunge' feed is no required.