BIPICO Precision Hole Saws are manufactured from M42–8% Cobalt grade from Bimetal strip which gives excellent wear resistance & long durability.

BIPICO Bimetal Hole Saws are manufactured of hardened steel and abrasion resistance with M42-8% Cobalt high speed steel edge with a tough alloy steel body and disc.

BIPICO manufactures Bimetal Hole Saw in variable pitch with positive rake angle.

Salient Features & Advantages :-

• Reduces cutting vibrations.
• Cutting 30% faster than conventional Hole Saw.
• Provide extra swap clearance when cutting thicker metal section.
• Easier penetration into the material.
• Smooth cut and have less tendency to snag on, contact with irregular service.
• Hollow out material from the groove more efficiently.
• Bipico Hole Saw is useful in cutting Cast Iron, Mild Steel, Cast Steels, Stainless Steel, Aluminium, Duralium, Inconel, Inox, Non Ferrous Alloys, Bakelite, Bronze, Brass, Wood, Hardwood, Metal, and Plaster of Paris.
• Hole Saw is useful for variety of applications like production, maintenance, electrical panel manufacturer, electrical contractor, building contractor and carpenter.

 

Hole Saw Cutting Tips :-

• Always wear safety glasses.
• Keep hands, loose hair and clothing away from the rotating Saws.
• Use oil or coolant on most metals except cast iron.
• Hold the Impact drill machine firmly and perpendicular to the work surface.
• Use enough pressure to ensure that the hole saw cuts and does not just “rub” the work. Make clear the chips frequently from hole saw.
• Run the hole saw at recommended speeds for the material to be cut and the diameter of the Saw. Use a variable speed machine, if possible.
• Do not run the Saw too fast (see RPM chart).
• For tough cuts and production work, consider using our “locking arbor” which eliminates chatter and vibrations, extending the hole saw life.
• When sawing tough materials such as ceramics, it is sometimes a good idea to leave the drill in only long enough to allow the hole saw to penetrate the material and establish its position. Then take the drill out of the hole saw. This will lessen pressure, which will allow for a much faster cut.
• Coolant should be used, especially when cutting metals and fired ceramics.
• Always start with low (or recommended) speed (RPM). Speed can be increased as ease of cutting is noticed. Avoid extreme heat build-up on the cutting surface.

BIPICO Quality Policy :-

Bipico commits to manufacture and supply high quality cutting tools to customers with the help of following objectives

• Produce consistently high quality cutting tools.
• Customer satisfaction.
• Become and remain first choice of customers.

This shall be demonstrated by

• Establishing and maintaining the ISO 9001:2008 quality system.
• Involving all employees through regular training.
• Putting continuous efforts to improve product quality.

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.