The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The meter offers an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 28 II Rigged Digital Multimeter is built to work in the toughest environments.

Other Key Capabilities:

• Measure up to 1000 V AC and DC
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 200 kHz
• Extended AC voltage bandwidth– 15 Hz to 20 kHz
• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Resistance, continuity, and diode test
• Min/Max and average recording to capture variations automatically
• Peak min-max
• Hi resolution 20,000 count display mode
• True-RMS ac voltage and current for accurate measurements on nonlinear signals
• Backlit keypad buttons allow for easy visibility in low-lit areas
• Large display digits and 2 levels bright white backlight for increased visibility
• Reversible holster for added protection when not in use
• Withstands hazardous 8,000-volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
• Long battery life (800 hours)
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.

Features:

• IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
• Designed to withstand 3-meter drop (with holster)
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
• MSHA approval
• Limited lifetime warranty.

What's Included In This Package:

• Fluke 28 II Rugged Digital Multimeter
• (1 pair) TL75 test leads
• (1 pair) AC175 alligator clips
• 80BK-A type-K thermocouple leads
• Quick reference guide

Specifications:

DC voltage	Range	0.1 mV to 1000 V
	Accuracy	0.05% + 1
AC voltage	Range	0.1 mV to 1000 V
	Accuracy	0.7% + 4
DC current	Range	0.1 μA to 10 A
	Accuracy	0.2% + 4
AC current	Range	0.1 μA to 10 A
	Accuracy	1.0% + 2
Resistance	Range	0.1 Ω to 50 MΩ
Display counts	6000
Capacitance	1 nF to 9999 μF
Frequency	0.5 Hz to 199.99 kHz
Temperature	-200°C to +1090°C
Low pass filter (Measurement on VSD’s)	Yes
Compliance	CAT IV 600 V , CAT III 1000 V
IP rating	IP 67
Power	Three AA batteries
Battery life	800 hours

Please Note that Products may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.