The Fluke 434-II Energy Analyzer and 435-II Power Quality and Energy Analyzer are designed to help you minimize downtime, quickly troubleshoot power quality issues, and easily discover the costs of wasted energy. Downtime is expensive and getting the data you need to solve to critical power quality problems quickly is key. The 434-II and 435-II Analyzer’s measurement process and data output have been optimized to help you access the most critical information easily.

Multiple parameters are measured simultaneously and displayed in formats that quickly describe overall power quality health. The detailed information helps you make better maintenance decisions—whether you’re trying to reduce energy waste, find the source of power quality issues or see how motor startups are affecting your electrical system. Data can be accessed as simple digital values, trend graphs (for fast insight into changes over time), waveforms, or phasor diagrams. The data can also be analyzed and organized into tabular formats. Detailed event data allows you to see the magnitude, duration, and time stamping of anomalies enabling you to rapidly correlate the problems you are experiencing in your facility.

Energy Loss Calculator—Calculate money lost to energy waste in terms of real dollars.

Fluke 430 Series II Energy Loss Calculator

It’s a simple fact, poor power quality can have a big impact on the bottom line. The Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer enable you to identify issues and measure energy loss giving you specific insight into the amount of loss in dollars. The Energy Loss Calculator helps you better understand your energy consumption by creating associations between things like effective power and poor power quality characteristics such as reactive power, unbalance, distortion, or neutral current. These power quality and energy analyzers also offer users the flexibility to input cable length and diameter to calculate loss due to conductor sizing (or use AUTO mode if cable specifications are unknown) and enter up to four unique time-dependent daily rates (kWh) for more accurate calculations. Armed with this critical data, users can easily justify the investment necessary to take countermeasures.

Advanced Power Quality Health—At-a-glance power quality health data in real-time so you have the data you need when you need it

Power wave data capture

The Fluke 434-II Energy Analyzer and 435-II Power Quality and Energy Analyzer utilize an integrated Power Quality Health summary that gives you an at-a-glance view of a complete range of power quality issues in real-time. With a simple graphical presentation, complete with tolerance limits, you can quickly discover which power quality problems may be present on your electrical system. If you don’t know where to start or what problems might exist, the advanced Power Quality Health summary simplifies the task and serves as a comprehensive starting point for further troubleshooting.

Power Inverter Efficiency:
Power inverters take dc current and transform it into ac current, or vice versa. But, what percentage of that power going into the inverter comes out as usable current? The Fluke 434-II and 435-II Analyzers have an integrated power inverter efficiency mode that allows users to better understand power inverter performance. Nothing is ever 100 % efficient, and a power inverter’s efficiency will vary depending on how much power is being used at the time (with the efficiency generally being greater when more power is being used). Inverters can also lose performance over time and need to be checked. By comparing the input power with the output power, you can determine the system's efficiency. With the Power Inverter Efficiency feature, you can discover just how good your inverter is at converting your dc power to ac (or vice versa).

AutoTrend—Quickly see the trend

AutoTrend capability shows changes over time

With a unique AutoTrend feature you can get fast insight into power quality changes over time. Every displayed reading is automatically and continuously recorded without having to set up threshold levels or having to manually start the process so you can quickly view trends in voltage, current, frequency, power, harmonics or flicker on all three phases plus neutral.

Advanced Power Quality Functions, Unprecedented Energy Analysis Capabilities

Power quality issues can affect the operation of critical loads and have a negative impact on your bottom line. Think of the Fluke 435-II Power Quality and Energy Analyzer as your insurance policy. Calculate the cost of wasted energy due to poor power quality and troubleshoot the source of power quality or motor performance issues all with a single test tool designed to give you the data you need to quickly get to the root of the problem.

Wrapped in a lightweight, rugged package, the Fluke 434-II Energy Analyzer and 435-II Power Quality and Energy Analyzer are the ideal portable power quality instruments.

• Quickly see how much money you’re losing due to energy waste in terms of real dollars
• Get at-a-glance power quality health data in real-time so you can make better maintenance decisions
• Measure all three phases and neutral with the included flexible current probes
• Easily see how motor startups are affecting electrical system performance
• Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
• Fluke Connect® compatible* – view data locally on the instrument, via Fluke Connect mobile app and PowerLog 430-II desktop software

The Fluke 430-II Series Power Quality Analyzers

The Fluke 434-II Energy Analyzer helps you understand your overall energy consumption and quantify how much energy loss is costing your facility. The Fluke 435-II Power Quality and Energy Analyzer includes the same great features of the 434-II while adding advanced power quality functionality for more in-depth troubleshooting. If you need the same advanced functionality as the 435-II a higher frequency, the Fluke 437-II is the must-have power quality analyzer for 400 Hz power systems. Lastly, the Fluke 438-II Power Quality and Motor Analyzer include all the power quality and energy analysis capabilities that the Fluke 435-II has as well as the ability to measure mechanical motor parameters such as motor speed, torque and mechanical power without the need of mechanical sensors.

Key features:

Analyze power quality issues, calculate the costs of wasted energy and prevent downtime with the Fluke 434-II Energy Analyzer and Fluke 435-II Power Quality and Energy Analyzer.

• Advanced power quality health—At-a-glance power quality health data in real-time so you can make better maintenance decisions
• Energy loss calculator—Discover the costs of energy loss specifically caused by poor power quality
• Highest safety rating in the industry—CAT III 1000 V / CAT IV 600 V.

 

Volt
	Model	Measurement Range	Resolution	Accuracy
Vrms (AC + DC)	434-II	1 V to 1000 V phase to neutral	0.1 V	±0.1% of nominal voltage1
	435-II	1 V to 1000 V phase to neutral	0.01 V	±0.1% of nominal voltage1
Vpk		1 Vpk to 1400 Vpk	1 V	5% of nominal voltage
Voltage Crest Factor (CF)		1.0 > 2.8	0.01	±5%
Vrms½	434-II	1 V to 1000 V phase to neutral	0.1 V	± 1 % of nominal voltage
	434-II and 435-II		0.1 V	±0.2% of nominal voltage
V fund	434-II	1 V to 1000 V phase to neutral	0.1 V	± 0.5 % of nominal voltage
	435-II		0.1 V	± 0.1 % of nominal voltage

 

Amps (accuracy excluding clamp accuracy)
Amps (AC + DC)	i430-Flex 1x	5 A to 6000 A	1 A	±0.5% ±5 counts
	i430-Flex 10x	0.5 A to 600 A	0.1 A	±0.5% ±5 counts
	1mV/A 1x	5 A to 2000 A	1A	±0.5% ±5 counts
	1mV/A 10x	0.5 A A to 200 A (AC only)	0.1 A	±0.5% ±5 counts
Apk	i430-Flex	8400 Apk	1 Arms	±5%
	1mV/A	5500 Apk	1 Arms	±5%
A Crest Factor (CF)		1 to 10	0.01	±5%
Amps½	i430-Flex 1x	5 A to 6000 A	1 A	±1% ±10 counts
	i430-Flex 10x	0.5 A to 600 A	0.1 A	±1% ±10 counts
	1mV/A 1x	5 A to 2000 A	1 A	±1% ±10 counts
	1mV/A 10x	0.5 A A to 200 A (AC only)	0.1 A	±1% ±10 counts
Afund	i430-Flex 1x	5 A to 6000 A	1 A	±0.5% ±5 counts
	i430-Flex 10x	0.5 A to 600 A	0.1 A	±0.5% ±5 counts
	1mV/A 1x	5 A to 2000 A	1 A	±0.5% ±5 counts
	1mV/A 10x	0.5 A A to 200 A (AC only)	0.1 A	±0.5% ±5 counts

 

Hz
Hz	Fluke 434 @ 50 Hz Nominal	42.50 Hz to 57.50 Hz	0.01 Hz	±0.01 Hz
	Fluke 434 @ 60 Hz Nominal	51.00 Hz to 69.00 Hz	0.01 Hz	±0.01 Hz
	Fluke 435 @ 50 Hz Nominal	42.500 Hz to 57.500 Hz	0.001 Hz	±0.01 Hz
	Fluke 435 @ 60 Hz Nominal	51.00 Hz to 69.00 Hz	0.001 Hz	±0.01 Hz

 

Power
Watts (VA, var)	i430-Flex	max 6000 MW	0.1 W to 1 MW	±1% ±10 counts
	1 mV/A	max 2000 MW	0.1 W to 1 MW	±1% ±10 counts
Power Factor (Cos j/DPF)		0 to 1	0.001	±0.1% @ nominal load conditions

 

Energy
kWh (kVAh, kvarh)	i430-Flex 10x	Depends on clamp scaling and V nominal		±1% ±10 counts
Energy Loss	i430-Flex 10x	Depends on clamp scaling and V nominal		±1% ±10 counts Excluding line resistance accuracy

 

Harmonics
Harmonic Order (n)		DC, 1 to 50 Grouping: Harmonic groups according to IEC 61000-4-7
Inter-Harmonic Order (n)		OFF, 1 to 50 Grouping: Harmonic and Interharmonic subgroups according to IEC 61000-4-7
Volts %	f	0.0% to 100%	0.1%	±0.1% ±n x 0.1%
	r	0.0% to 100%	0.1%	±0.1% ±n x 0.4%
	Absolute	0.0 to 1000 V	0.1 V	±5%1
	THD	0.0% to 100%	0.1%	±2.5%
Amps %	f	0.0% to 100%	0.1%	±0.1% ±n x 0.1%
	r	0.0% to 100%	0.1%	±0.1% ±n x 0.4%
	Absolute	0.0 to 600 A	0.1 A	±5% ±5 counts
	THD	0.0% to 100%	0.1%	±2.5%
Watts %	f or r	0.0% to 100%	0.1%	±n x 2%
	Absolute	Depends on clamp scaling and V nominal	—	±5% ±n x 2% ±10 counts
	THD	0.0% to 100%	0.1%	±5%
Phase Angle		-360° to +0°	1°	±n x 1°

 

Flicker
Plt, Pst, Pst (1 min) Pinst		0.00 to 20.00	0.01	±5%

Unbalance
Volts %		0.0% to 20.0%	0.1%	±0.1%
Amps %		0.0% to 20.0%	0.1%	±1%

Mains Signaling
Threshold Levels		Threshold, limits and signaling duration is programable for two signaling frequencies	—	—
Signaling Frequency		60 Hz to 3000 Hz	0.1 Hz
Relative V %		0% to 100%	0.10%	±0.4%
Absolute V3s (3-second avg.)		0.0 V to 1000 V	0.1 V	±5% of nominal voltage

General Specifications
Case	Design Rugged, shockproof with integrated protective holster Drip and dustproof IP51 according to IEC60529 when used in tilt stand position Shock and vibration Shock 30 g, vibration: 3 g sinusoid, random 0.03 g 2 /Hz according to MIL-PRF-28800F Class 2
Display	Brightness: 200 cd/m 2 typ. using power adapter, 90 cd/m 2 typical using battery power Size: 127 x 88 mm (153 mm/6.0 in diagonal) LCD Resolution: 320 x 240 pixels Contrast and brightness: user-adjustable, temperature compensated
Memory	8GB SD card (SDHC compliant, FAT32 formatted), up to 32GB optionally. Screen save and multiple data memories for storing data including recordings (dependent on memory size).
Real-Time Clock	Time and date stamp for Trend mode, Transient display, System Monitor and event capture

Environmental
Operating Temperature	0°C ~ +40°C; +40°C ~ +50°C excl. battery
Storage Temperature	-20°C ~ +60°C
Humidity	+10°C ~ +30°C: 95% RH non-condensing +30°C ~ +40°C: 75% RH non-condensing +40°C ~ +50°C: 45% RH non-condensing
Maximum Operating Altitude	Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V Maximum storage altitude 12 km (40,000 ft)
Electro-Magnetic-Compatibility (EMC)	EN 61326 (2005-12) for emission and immunity
Interfaces	Mini-USB-B, Isolated USB port for PC connectivity SD card slot accessible behind instrument battery
Warranty	Three years (parts and labor) on the main instrument, one year on accessories

Please Note that Products may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.