HiKoki DH26PC 3 Mode Action Rotary Hammer can perform hammer drilling, hammering only, and drilling only functions. It comes with an 830-Watt motor that runs at a maximum speed of 1100 rpm. Its idle striking prevention mechanism lowers vibration and noise during no-load operation. The variable speed allows users to adjust the speed according to their preferred drilling application.

This rotary hammer has a single action bit change that enables easy operation. The forward and reversible action ensures precision and efficiency. The internal pressure adjustment mechanism stabilizes the hammering action by providing smooth airflow. User comfort is further enhanced in this HiKoki rotary hammer with its soft touch dual-layer front handle with non-slip rear handle

• Faster drilling speed.
• Large change lever located on the side of the tool body for easy operation.
• Simple bit mounting.
• Soft and easy to grip for comfortable operation.
• Angle adjustment function.

Features & Benefits:

• Hammering mechanism features air channel system: Up to 50% more volume of air cushion *1 reduces wear and damage inside the cylinder.
• Ball bearings: Ball bearing seals in grease and holds temperature low to protect meltdown of gear cover.
• New internal pressure control mechanism: Provides smooth airflow in or out of the gear cover to stabilize and ensure hammering action.
• Rotation only: For drilling in steel and wood etc.(with optional drill chuck and chuck adapter)
• Rotation & Hammering: For drilling into concrete etc.
• Hammering only: For chiselling of concrete and groove digging etc

 

Compact Body The shortened overall length results in better handling.

Ventilation windows Double ventilation windows (inlets) in labyrinth construction does less harm to the motor by reducing the ingress of dust and debris into the tool.

New Construction for Motor Protection Labyrinth Ventilation Windows for reducing the ingress of dust and debris into the tool

Large Change Lever Located on the side of the tool body for easy operation

Angle Adjustment Function When using a cold chisel or cutter, the angle of the tool tip can be adjusted by setting the change lever as shown on the left

Easy to insert a bit One-push Bit Mounting

Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.