Kusam-Meco 3-5/6 Digits 6000 Counts True RMS Digital Clampmeter With VFD, EF-Detection, KM 088
Roll over image to zoom zoom_in
- Weight: 392 Grams
- Product Type: Clamp Meters
- Display Digits: 3-5/6
- Display Counts: 6000
- receiptGST Invoice
- headphonesCustomer Service
- lockSecure Payments
- policyReturns & Warranty
- home_pinOrder Tracking
- paymentsBuy in Installments
₹15481.6 (Incl. of all taxes)
₹13120+ ₹2361.6 GST (18%)
MRP ₹16400
SAVE 20%
3 Business Days
1 Pcs
90303100
picture_as_pdfDownload Product Leafletkeyboard_double_arrow_right
picture_as_pdfBrand Authorization Certificatekeyboard_double_arrow_right
picture_as_pdfDownload Bosch Cataloguekeyboard_double_arrow_right
picture_as_pdfBrand Authorization Certificatekeyboard_double_arrow_right
picture_as_pdfDownload Bosch Cataloguekeyboard_double_arrow_right
Highlights
AmpTip™ low-current range calibrated at Jaw-tip for slim conditions for accurate readings. VFD-V & Hz for fundamental V/Hz of most Variable-Frequency-Drives
Features & Benefits:
- MAX/MIN/AVG Recording mode (Auto-ranging)
- Display Hold & Non-Contact EF-Detection (NCV)
- Back-lighted easy-to-read LCD display
- Back-lighted easy-to-read LCD display
- BackFlashlight for easy operation in dim areas
- BackFast 80ms Peak-RMS mode to capture in-rush currents
- BackAuto-ranging Relative mode with DC-Zero mode &
- Back5ms Crest (Instantaneous Peak-Hold) mode
- Relative Humidity - Non condensing ( <10ºC) Maximum 90%R.H. at 10-30°C decreasing linearly to 75% R.H. at 30-40°C & 45% R.H. at 40-50°C
- Temperature Coefficient : Nominal 10.0 x (specified accuracy) / °C @ (-10 °C- 18 °C or 28 °C - 50 °C), or otherwise specified
- Low Battery: Below approx. 2.85V for Capacitance & Hz / Below approx. 2.5V for other functions
Safety:
- Double insulation per UL/IEC/EN61010-1 Ed. 3.0, IEC/EN61010-2-033 Ed. 1.0, CAN/CSA C22.2 No. 61010-1 Ed. 3.0, IEC/EN61010-2-032 Ed. 3.0 & IEC/EN61010-031 Ed. 1.1
- Measurement Category: CAT III 1000V AND CAT IV 600V AC & DC
- E.M.C.: Meets EN61326-1 : 2006 (EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11) : ACA, DCA and DC+ACA Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy + 60 digits at around 200MHz~350MHz DCµA and Ohm Functions, in an RF field of 1V/m : Total Accuracy = Specified Accuracy + 80 digits. Other Functions, in an RF field of 3V/m : Total Accuracy = Specified Accuracy + 20 digits
- Overload Protection: Current & Hz functions via jaws : 1000ADC/AAC rms at <400Hz / Other functions via terminals : 1000VDC/ VAC rms
- Pollution Degree: 2 / Rugged Fire retarded casing.
- Transient Protection: 8.0kV (1.2/50ms surge)
- LVD EN61010-2-032/EN61010-2-033 to CAT III 1000V & CAT IV 600V
Package Content:
- Test leads set
- Users Manual
- Soft carrying pouch
Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.
Specifications
SKU | ME.EL.CL.00152 |
---|---|
Product Type | Clamp Meters |
Model No | KM088 |
Sensing | AC; True RMS |
Jaws Opening Size & Conductor Diameter | 51 mm (Max.) |
Display Digits | 3-5/6 |
Display Counts | 6000 |
Update Rate | 5 Per Second Nominal |
Polarity | Automatic |
Operating Temperature | -10° C to 50° C |
Altitude | Operating Below 2000m / Storage Below 12000m |
Storage Temperature | -20 °C ~ 60 °C, <80% R.H. (With Battery Removed) |
Power Supply | Standard 1.5V AA Battery X 2 |
Power Consumption | Typical 13 mA For Current Functions |
APO Timing | Idle For 32 Minutes |
APO Consumption | Typical 5 µA |
Dimension (LxWxH) | 258 x 94 x 44 mm |
Shop By Related Categories
Kusam-Meco 3-5/6 Digits 6000 Counts True RMS Digital Clampmeter With VFD, EF-Detection, KM 088
Visit Kusam-Meco Store keyboard_double_arrow_right₹15481.6 (Incl. of all taxes)
₹13120+ ₹2361.6 GST (18%)
MRP ₹16400
SAVE 20%