The DT-3150 Digital Clamp Meter has 3-3/4 Digits, Backlit LCD, Fully Protected, Data Hold, 55mm Jaw Size, AC/DC Voltage, AC Current up to 1000A, Resistance, Capacitance, Frequency, Duty Cycle, Diode and Continuity Test Facility. 1000V DC/AC Protection in all ranges.

Features:

• Clamp size : Opening 55mm approx
• Diode Test : Test current of 0.3mA typical, Open circuit voltage 1.5V DC typical
• Continuity Check : Threshold <1002, Test current < 1mA
• Low Battery Indcation : Symbol is displayed
• Overrange Indication : "OL" is displayed
• Measurements Rate : 2 per second, nominal
• Input Impedance : 10 MOhm (VDC and VAC)
• Display : 3-3/4 digits, 4000 counts Backlit LCD
• Data Hold : To Freeze the displayed data
• AC Current : 50/60Hz (AAC)
• AC Voltage bandwidth : 50-400Hz (VAC)
• Operating Temperature : -14 to 122°F (-10 to 50°C)
• Storage Temperature : -14 to 140°F (-30 to 60°C)
• Relative Humidity : 90% (0°C to 30° C ), 75% (30°C to 40°C), 45% (40°C to 50°C)
• Altitude : Operating: 300m; Storage 10,000m
• Over voltage : Category III 1000V, Category IV 600V
• Auto OFF : Approx. 30 minutes
• Safety : For indoor use and in accordance with Overvoltage Category II, Pollution Degree 2. Category II includes local level, appliance, portable equipment, etc., with transient overvoltages less than overvoltage Cat III
• Auto Ranging
• Relative Measurement.
• Overload Indication

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.