• 2.4-inch 320x240 TFT LCD with clear graphic interface.
• Chinese / English menu available
• The two channels are independent of each other, with phase synchronization function
• Sampling rate: 200MSa/S, vertical resolution: 13 bit and storage depth: 8k 5.
• Basic waveform and 32 arbitrary waveform in-built
• Waveform storage; Supports internal storage of 50 groups of user-defined edited waveform
• Pulse wave output set in edge time
• Internal AM, FM, PM modulation function (External AM, FM, PM modulation matching)
• Internal/external ASK, FSK and PSK modulation function
• Two-channel output, the highest output frequency is 60M
• Output of linear/logarithmic frequency sweep and burst waveform
• Frequency meter of high precision of 100MHz and 32-bit counter
• With USB Device,external analog modulation interface
• Multi-functional arbitrary waveform editing software equipped.

Technical Data:

Waveform
Sine wave	Harmonic Suppression	≥45dBc (<1MHz); ≥40dBc (1MHz ~ 20MHz)
	Total Harmonic Distortion	<0.8% (20Hz ~ 20kHz, 0dBm)
Square wave	Rise/Fall time	<20ns
	Overshoot	<5%
	Duty cycle range	Frequency < 100 KHZ: 1% ~ 99%;
		100kHz≤ frequency <5MHz: 20% ~ 80%
		5MHz≤ frequency: 40% ~ 60%(0.1% resolution)
Pulse wave	Pulse width	Minimum 20ns; 1 ns resolution
	Edge jumping time	Minimum 20ns
	Overshoot	<5%
	Shaking	6ns + 0.1% period cycle
Sawtooth wave	Linearity	≥98%(0.01Hz ~ 10kHz)
	Symmetry	0.0 ~ 100.0%(resolution 0.1%)
Trigger Input
Signal Range	2Vpp~20Vpp
Coupling	AC or DC
Pulse Width	>100ns
Reaction Time	<500ns(Burst) / <10µs (Sweep)
Modulation Input
Impedance	1M Ohm
Signal Range	±2.5V (AC+DC)
Amplitude
Amplitude range	30MHz ≤ Frequency
	2mVpp ~ 5Vpp
Amplitude resolution	1mV
Amplitude accuracy	1% + 2mVpp of set value (1kHz sine wave, 0 offset, >10mVpp)
Amplitude flatness (Relative to 1k sine wave, 1Vpp)	±0.4dB <10MHz; ±1.0dB ≥10MHz
Output impedance	50Ω±10% (typical)
Protection	All signal outputs can work within 60 when the load is short-circuited
Offset
Output range	Output amplitude > 0.1V 2mV < Output amplitude ≤ 0.1V
	±10Vpk, AC + DC / ±0.250Vpk, AC + DC
Offset resolution	1mV
Phase
Phase adjustment range	0 ~ 359.9°
Phase resolution	0.1°
External Measurement Function
Frequency meter function	1Hz~100MHz (Frequency Measurement)
	Gate time: 0.01S~10s continuous adjustment
Counter function	Counting range: 0 - 4294967295
	Counting method: Manually
Input signal voltage range	2Vpp ~ 20Vpp
Coupling	DC or AC
Pulse width measurement	1ns resolution, maximum measurable 20s
Period measurement	1ns us resolution, maximum measurable 20s

Package Content:

• 1x DDS Function Generator with Counter
• 1x Power cable with three cords
• 2x BNC coaxial cable
• 1x USB data line
• 1x Signal straight line
• 1x User Manual

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.