• Integrated with oscilloscope,  frequency counter, voltmeter and FFT spectrum analyzer.
• 50M storage depth, up to 700,000wfms/s waveform refresh rate, ensuring clear signal capture.
• 12-bit Vertical Resolution, vertical sensitivity is 500uV/div-10 V/div.
• 1M- point FFT analysis ensures accurate frequency component display.
• Rich triggering: edge, video, pulse width, slope, under-amplitude, over-amplitude, timeout, Nth edge, logic and RS232/UART, l2C, SPI, CAN, LIN; 2-channel hardware decoding: RS232 / UART, I2C, SPIl, CAN, LIN.
• Support for external devices like mouse and keyboard, greatly enhancing efficiency.
• Optional wireless module (Wi-Fi/Bluetooth) supports network printers.
• Ultra-thin design saving valuable workspace.
• 7-inch touchscreen with multi-touch support for an enhanced interactive experience.
• Optional 12V/5000mAh built-in lithium battery provides approximately 2 hours of operation.

Technical Data:

Max. sample rate	1.25GSa/s (single-channel) 625MSa/s (dual-channel) 6250MSa/s (full-channel)
Acquire mode	Sample, Peak, High Res, Average, Segmentation
Trigger type	Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth, Logic, RS232/UART, I2C, SPI CAN, LIN
Auto measurement	Period, Frequency, +Width, -Width, Rise Time, Fall Time, Scr Duty, +Duty,-Duty, Vavg, Vpp, VRMS, Overshoot, Vmax, Vmin, Vtop, CycRms, Vbase, Vamp, Preshoot, Std Dev, +Pulse Cnt, -Pulse Cnt, Rise Cnt, Fall Cnt, Area, Cyc Area, Delay(A↑-B↑), Delay(A↑-B↓), Delay(A↓-B↑), Delay(A↓-B↓), Phase(A↑-B↑), Phase(A↑-B↓), Phase(A↓-B↑), Phase(A↓-B↓), FRR(A↑-B↑), FRF(A↑-B↓), FFR(A↓-B↑), FFF(A↓-B↓), LRR(A↑-B↑), LRF(A↑-B↓), LFR (A↓-B↑), LFF(A↓-B↓)
Waveform Math	+, -, *, /,&&, ||, ^, !, Intg, Diff, Sqrt, Function operation (Lg / Ln / Exp / Abs / Sine / Cosine / Tan), FFT, FFT rms, User Defined, digital filter (low pass, high pass, band pass, band reject)
Frequency counter	6-digit frequency counter, 7-Maximum frequency: maximum analog bandwidth of oscilloscope
Voltmeter	Support DC, AC+DCrms, ACrms. Resolution: 4 digits (ACV/DCV)
Communication Interface	HDMI, USB device, USB Host, Trig Out(P/F), LAN
Display	7-inch (1024×600), capacitive multi-touch screen
Power supply interface	Type-C [1]; Supports 12V/5000mAh lithium battery (optional, to be specified prior to factory shipment)

 

What's Included In This Package:

• 1x Oscilloscope
• 1x Adapter
• 1x Power Cord
• 1x Quick Guide
• 1x USB Cable
• 1x Probe

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.