Kyoritsu 1000A AC Digital Clamp Power Meter, KEW 2062

Shop all Kyoritsu

SKU: ME.EL.CL.00319

Model: KEW2062


Key Features

  • Product Type: Clamp Meters
  • Weight: 490 g
  • AC Voltage (V): 1000V
  • AC Current (A): 40.00/400.0/1000A (3 range auto)
See all product information

ToolBuy Benefits

₹85,312 (Incl. of all taxes)

₹72,298 + ₹13,014 GST (18%)

MRP was MRP ₹1,16,610

Save 38%



5 Business Days

1

90303300

Download Product LeafletNot available
Download Kyoritsu CatalogueNot available

Product Information

Highlights

  • Current up to 1000A rms
  • Voltage up to 1000V rms
  • Harmonics up to 30th
  • KEW 2062 and KEW 2062BT have a tear drop shape jaw, and the size is convenient to use at a small-sized office and factory (Conductor size 55 mm)

Technical Data:

AC Voltage (V)
Range1000V
Accuracy±0.7%rdg±3dgt (40.0 to 70.0Hz)
±0.3%rdg±5dgt (70.1Hz to 1KHz)
Crest factor1.7 or less
AC Current (A)
Range40.00/400.0/1000A (3 range auto)
Accuracy±1.0%rdg±3dgt (40.0 to 70.0Hz)
±2.0%rdg±5dgt (70.1Hz to 1kHz)
Crest factor3 or less on 40.00A/400.0A range, 3 or less 1500A peak on 1000A range
 Frequency  
Display Range40.0 to 999.9Hz
Accuracy±0.3%rdg±3dgt
 Active power  
Range40.00/400.0/1000kW
Accuracy±1.7%rdg±5dgt (PF1, sine wave, 45 to 65Hz)
 Apparent power  
Range40.00/400.0/1000kVA
Accuracy±1dgt against each calculated value 
Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
 Reactive power  
Range40.00/400.0/1000kVar
Accuracy±1dgt against each calculated value 
Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
 Power factor  
Display Range-1.000 to 0.000 to +1.000
Accuracy±1dgt against each calculated value 
Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
 Phase angle (1P2W only)  
Display Range-180.0 to 0.0 to +179.9
AccuracyWithin ±3.0°
 Harmonics RMS(Content rate)  
Analysis order1st to 30th order
Accuracy±5.0%rdg ± 10dgt (1 to 10th)
±10%rdg ± 10dgt (11 to 20th)
±20%rdg ± 10dgt (21 to 30th)
 Total harmonics THD-R/THD-F   
Display Range0.0% to 100.0%
Accuracy±1dgt against the calculated results of each measured value
 Applicable standards  
  • IEC 61010-1
  • IEC 61010-2-032 
  • IEC 61326-1
  • 2-2 Class B CAT Ⅳ 300V
  • CAT Ⅲ 600V
  • CAT Ⅱ 1000V Pollution degree 2  

 KEW2062-v2
  Various measurement functions
  •  Measurements of current, voltage, power, harmonics and phase detection are possible.
  • True RMS: Indicates a correct value at the distorted waveform.
  • Functions of PEAK, MAX, MIN, AVG are available.
  • Easy to check the temporal change in the power source.
  • LCD can display simultaneously the values of voltage and frequency or power and power factor.
Power Measurement
KEW2062-v3

Power measurement on any wiring system is possible.

KEW 2062 can perform Single-phase 2-Wire / Single-phase 3-Wire and balance and unbalance measurements of Three-phase 3-Wire / Three-phase 4 Wire. The double display can simultaneously show many parameters like W & PF, W & deg, W & VA, W & Var, V & A, etc.

KEW2062-v4 Various parameters such as active/reactive/apparent power, power factor, phase differences (1P2W only) which are required for the power measurement can be measured.  
KEW2062-v5 Total 3-phase power can be measured in simple steps.  
KEW2062-v6 By setting the CT and VT ratio and measuring the secondary side of the transformation, the primary side value can be obtained.  
KEW2062-v7
Harmonics measurement
  • Harmonics of the voltage and current, which cause various failures at the field, can be measured.
  • It is possible to measure and show each voltage and current harmonics up to 30th.
  • Total harmonics distortion factor is in two types of THD-R and THD-F. Each degree of harmonics can be shown on the LCD of the tester. Both the current value (or voltage value) and the content ratio can be displayed on the same screen.  
Phase detection
KEW2062-v8

Measurements & Parameters:  

  •  Voltage
  • Current 
  • Frequency 
  • Active power 
  • Reactive power 
  • Apparent power 
  • Power factor(cosθ) 
  • Phase angle
  • Harmonics (THD-R/THD-F) 
  • Phase rotation  

Package Content:

  • AC Clamp Power Meter  
  • Voltage test lead set (7290)
  • 2x AA Batteries (LR6)
  • Carrying Case (9198)
  • Instruction Manual  

Backlight-v1Backlight
CEComplies with EU Regulations
TRMSTrue RMS
Dia.55Ø55 mm  


Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision.

Specifications

Technical specifications for Kyoritsu 1000A AC Digital Clamp Power Meter, KEW 2062
AC Voltage (V)1000V
AC Current (A)40.00/400.0/1000A (3 range auto)
Frequency40.0 to 999.9Hz
Active Power40.00/400.0/1000kW
Apparent Power40.00/400.0/1000kVA
Reactive Power40.00/400.0/1000kVar
Power Factor-1.000 to 0.000 to +1.000
Phase angle (1P2W only)-180.0 to 0.0 to +179.9
Harmonics RMS (Content rate)1st to 30th order
Total harmonics THD-R/THD-F0.0% to 100.0%
Wiring connections1P2W, 1P3W, 3P3W, 3P4W
Phase RotationACV 80 to 1100V (45 to 65Hz)
Other FunctionsMAX/MIN/AVG/PEAK, Data hold, Bluetooth®, Backlight, Auto power off
Power Source2x 1.5V AA Batteries (LR6)
Continuous Measuring TimeApprox. 58 hours
Conductor SizeØ55 mm max. (busbar of 80 x 30 mm)
Dimensions (L x W x D)247 × 105 × 50 mm