• (Batteries & Charger are not included)
• 40Vmax XGT BL Cordless T-Mode 210 N·m (1,860 in.lbs.) Impact Driver
• Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functions
• Aluminum hammer case + Black bumper
• Excellent performance in continuous heavy-duty operation - High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation
• Constant speed control allows you to operate the tool at the same speed as that at which you operate the tool on a fully charged battery, even when the remaining battery capacity becomes low.
• Anti-bit wobbling structure
• XPT (eXtreme Protection Technology)
• BL motor / Soft grip / Belt clip
• One LED job light each on both sides

 

Simple impact power selection: 4 modes (Max/ Hard/ Medium/ Soft for bolt) 1 T-mode (for thin metal only)

Max fastening torque (210 N·m): Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers The Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation

Light mode: To turn on the light, set F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again The light turns off automatically one hour after turned on

One-touch bit installation: Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit

What's Included in this Package:

1x Cordless Impact Driver

1x Belt Clip

1x Hand strap (country-specific)

Capacity:

• Machine screw: M4 – M8 (5/32 – 5/16″)
• High strength bolt: M5 – M14 (3/16 – 9/16″)
• Steel: 22 mm (7/8″)
• Wood (Self-feed bit): N/A mm (N/A”)
• Standard bolt: M5 – M16 (3/16 – 5/8″)
• Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″)
• Wood (Auger bit): 24 mm (15/16″)

No Load Speed (RPM):

• 0 – 3,700 (Max) / 0 – 3,200 (Hard) / 0 – 2,100 (Med.) / 0 – 1,100 (Soft) / 0 – 2,400 (T mode)

Impacts per minute (IPM):

• 0 – 4,100 (Max) / 0 – 3,600 (Hard) / 0 – 2,600 (Med.) / 0 – 1,400 (Soft) / N/A (T mode)

Dimensions (L x W x H):

• w/o Battery: 121 x 86 x 195 mm (4-3/4 x 3-3/8 x 7-5/8″)
• w/ BL4040: 121 x 86 x 252 mm (4-3/4 x 3-3/8 x 9-7/8″)
• w/ BL4080F: 121 x 86 x 293 mm (4-3/4 x 3-3/8 x 11-1/2″)
• w/ BL4020 / BL4025: 121 x 86 x 245 mm (4-3/4 x 3-3/8 x 9-5/8″)
• w/ BL4050F: 121 x 86 x 274 mm (4-3/4 x 3-3/8 x 10-3/4″)

 

	Extreme Protection Technology
	Brushless Motor
	Next Generation Technology
	Variable-Speed
	Brake
	Reversing
	Electronic 4-Speed
	Built-in-Job-Light
	Constant Speed
	Carrying-Case

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.