The Sanwa DM1009S a DC insulation resistance tester to measure the insulation resistance of electric lines and equipment. The measured voltage is maintained until the low insulation resistance value at the rated current specifi­ed in IEC61557-2. This instrument is CAT. III 600V certified. The DM1009S is equipped with the discharge function to discharge a test circuit once the user is done testing it. The device can measure up to 2000MΩ of insulation resistance when a test voltage of 1000 volts is applied. This instrument can also measure voltages of up to 60V DC and 600V AC with an accuracy of ±5% of full scale.

Features:

• Test voltage DC1000V
• One-shot or continuous measurement push switch
• DCV measurement range (DC60V)
• Auto-discharge function
• Inner battery check range
• ACV measurement range
• Lightweight Design

Tolerance:

Scale (MΩ)	± 5% of reading (1st effective measurement range: written in the thick print above) ±10% of reading (2nd effective measurement range: written in small type above)
ACV	Within ±5% of the max. scale value(50~60Hz sine wave)
DCV	Within ±5% of the max. scale value

Package Content:

• Analog Insulation Tester
• Carrying Case with Strap
• Test Leads
• Manual

Please Note that Product may differ eg. colour, size from the product Image displayed on website. Kindly check the specifications provided to make better purchase decision. M.R.P Prices and specifications are subject to change without notice.